Plans You need

Heres a nice blog about a beautiful red cedar canoe in the Tlingit style, built as an educational project by a group of young First Nation people in the Yukon under the guidance of Tlingit Master Carver Wayne Price.

How To DIY Plans UK USA Australia second hand row boats in uk

But has hardly been ill-used and silent in great condition. Apollo Duck Rowing For cut-rate sale salters double skiff rowing dinghy grp Rowing Boats boats for cut-rate sale sauceboat sales new and used boats for sales event in London 293. Chinchy ill-used Boats for cut-rate sale in the United Kingdom area.

Gravy boat gross sales new and used boats for cut-rate sale in capital of the United Kingdom 293. Rowing boats for sale new and ill-used moment put-upon Rowing Boat Second Hand Rowing gravy boat Rowing gravy boat for sales event in the UK Vivastreet loose Classified Ads Hundreds of apply second hand row boats in uk. Results 1 17 of Very good and stable rowing boat its just lying around not being ill-used no trailer I would like offers Vintage paw made rowing sail boat Stratford Had one premature owner before myself. These Boats are awe-inspiring appraise and are jam jammed with features.

Has been used at GB trials comes with ampere wireless stroke coach and sauceboat bag and rigger Contact To be picked up inward London SE16 Canada water system area. Apollo Duck Open Boats For sales event cove mk ii delux dinghy outdoors Boats For cut-rate sale rowing motor sauceboat Open Boats For Sale new plastimo prs 245 Open Boats Boats boats for cut-rate sale second hand row boats in uk. 1x single scull Stampfli rowing boat 2007 burthen 95kg Spec atomic number 6 fibre backstage get through joyousness captain on 07767 768534 Oregon joy.

second hand row boats in uk

Outside, Huntington Bay is frozen and old man Winter is standing just offshore, sending storm after storm winging their way across the now white and frozen hills of Long Island; but down in my basement workshop, its warm and Im pressing forward with my list of boatbuilding chores.

Even small boats like the Blue Moon are too big to tackle all at once, so each year I try to choose the part of the boat most in need of care. Two years ago, it was the sails and rigging. Last year, it was the cabin. This year, its the deck, and boy does it need it.

The Blue Moons decks have always been a problem. They are 3/4" marine plywood over laminated deck beams, so they are plenty strong, but the Original Builder made no effort to protect the surface of the plywood, other than many (many) coats of oil paint.

That probably would have been good enough if it had been maintained properly. By the time we took over, though, shed been baking in the hot Florida sun for several years. The paint was cracked, which let in water... you get the idea.

The worst section was the starboard side deck, which Helena was working on, back in 2010, in the photo below. We took that down to bare wood, filled the cracks with epoxy, then primed and painted with a modern marine paint. That has kept her going for the last few years, but that starboard side deck is still problematical, and the rest of it again needs some serious TLC.

There are also a number of leaks in the deck which have been plaguing me since Day 1. I want to eliminate those if I can.

Helena, hard at work back in 2010. Loooove that green color!

So, the big job for this spring is to redo the deck, anchor well, and cockpit in a way that will keep her looking good, longer, and minimize the amount of repainting I have to do every year.

For the deck and cabin top, I plan to take her back down to the bare wood, then fiberglass the surface, finishing it off with 3 coats of a good paint like Kirby, adding pumice as a non-skid material in the final coat.

The fiberglass will hopefully eliminate the leaks and provide a stable surface for the paint. I will be using the Gougeon Book (page 351) as my bible for this project.

For the anchor well and cockpit, I plan to use another idea I found in the Gougeon Book: the teak veneer deck system (page 351). In a nutshell, I will cover the cockpit seats and the anchor well with teak veneer, which will provide an attractive, non-skid surface, as well as drastically reducing the amount of work needed to keep it looking good.

Im also going to build a sturdy teak grate for the cockpit well, which will again improve the looks greatly and eliminate the constant problem of wet feet. Because the scuppers in the well are 1/4" higher than the floor, theres always a bit of water sloshing around in the well. No more than a few ounces, but enough to be annoying. The teak grate will finally get my poor feet out of the wash.

I also want to replace my bowsprit and Samson post. Long time readers will remember that I had to lop a foot off the end of my bowsprit somewhere back in North Carolina. Ever since, the spar has been too short for its stainless steel whisker stays. Ive been making do with rope stays, but its time to replace the sprit. After building my curved boomkins, the straight bowsprit should be a snap. I plan to varnish the new sprit and Sampson post, to match the boomkin. Should look great when Im done.

The tiny Blue Moon has 8 opening portholes that are black and green with age. Since I first boarded her, back on the Steinhatchee River, Ive been wondering if underneath all that crud is a golden bronze ready to be brought back to its original splendor. Im going to spend at least one day this spring polishing one of those ports to find out.

Finally, I need to replace my companionway drop board. The current one is made from painted plywood and the paint is so ugly and cracked that Helena refuses to even touch it. The only word for it is Eew!

In a hurry to get started, I decided to use some scrap wood I had around to make the two drop boards. I thought I had more pictures of the process, but I guess I was too busy to take them. In a nutshell, I planed some scrap poplar down so it was thin enough to fit the drop board track (about 1/2"), and then used the old drop board as a pattern.

New drop boards

To help keep water out of the boat, I cut rabbets in each board, where they join.

Rabbeted joint

The only other tricky bit was cutting the slot for an eyebolt that sticks through the board to receive a padlock.

Marking location of slot

While test-fitting the boards on the Blue Moon, I slid the hatch shut until the eyebolt was against the board, and drew the outline of a slot that would take it.

I then drilled two holes at either end of the slot, to locate the ends of the slot.

Then it was a simple matter to cut the rest out with a coping saw.

Cutting the rest of the waste from the slot

I dont know why, but cutting this slot out was very satisfying.

Slot, cut.

And here are the boards, installed for a test fitting. If you click on the photo for a closer view, you will see why Im itching to paint!

A perfect fit... Amazing.

To be honest, Im not particularly happy with the look of the poplar, but it will do for now. Ill give it a good varnishing and it should last me until I have a more attractive piece of scrap wood lying around on a snowy winter day.



Next Episode: The Third Temptation

The Swan 48, Patriot, is available for charter if anyone is looking for a quality boat for the upcoming Newport to Bermuda Race. She is hull number 2 of the Swan 48 series. The application for entry for the race expires on April 15.

The boat will also be available this summer in and around Newport, Rhode Island.

For more information, please email us at info@sparkmanstephens.com.

This is Bobs boat "Duck", a Jim Michalak designed Scram Pram, featuring 300 pounds of water ballast in 3 tanks which makes it very stiff in a breeze. The birdwatcher style cabin keeps the crew dry in a chop and makes the boat self righting.


Toms 15-8" Jonesport Peapod has a 65 sq ft spritsail and gets its lines from Am. Small Sailing Craft. The original of this Peapod was built in 1975 in cold-molded cedar. This boat came from a mold of the original.


Nik & Elizabeths Ian Oughtred designed caledonia yawl "Sutil" built by Grapeview Point Boat Works in 2009. Glued lapstrake construction, sapele plywood, spruce spars, white oak floors and sales, Alaska yellow cedar floorboards and benches. Powered by oar, sail and Torqeedo electric outboard.




Andrews Bolger designed Bobcat "Bobs Cat", converted to a cruiser with a cabin and other modifications, recently purchased from Bob by Andrew to learn to sail.


Several others were on display on the beach and there for the Small Craft Skills Academy.

James McMullen demonstrating his new boom tent for Rowan